 |
Wireless P.I.R sensor
Uses an Passive Infra Red movement sensor so doesn’t require any cables
|
 |
Wireless Reed switch
A great solution for caravans, trucks and Ute canopies.
|
 |
Ultra-sonic sensor
Internal movement sensors. Can be added to all Autowatch alarm systems.
Note: Required for Thatcham alarm standards with the following systems:
446RLi Premium (CAT 1)
695CAN-BUS (CAT 2-1)
|
 |
Shock sensor
Single stage shock sensor is the simplest way to detect physical impact against the car. Once the vibration level exceeds the set value, the alarm trigger signal is sent
Operation
-
Electro-Mechanical activation
Sensor detects any vibration exerted upon the vehicle. An intruder is detected when the vibration exceeds the set level
-
Vibration Protection
Shock sensors will protect glass. Intruder attempting to interfere with either items will exert vibration upon the vehicle
-
Temperature compensative circuitry
Ensures sensitivity does not change as ambient temperature rises or falls
-
Sensitivity adjustment
Sensor allows installer to adjust sensitivity to provide compatibility with different size vehicles
|
|
|
Microwave sensor
Microwave sensors are suitable for convertibles and targa tops as the microwave field is self-limiting, unlike ultrasonic sensors which require a hard surface for reflection
Operation
-
Active Microwave Protection Field
Sensor establishes a microwave field. Any measured change in the density of the field is determined to be an intruder
-
Temperature compensative circuitry
Ensures sensitivity does not change as ambient temperature rises or falls
-
Sensitivity adjustment
Sensor allows iglass protection for all vehicles with hard-top and windup windows. Sensor is not prone to false alarm due to vibrationnstaller to adjust sensitivity to provide compatibility with different size vehicles
|
|
|
Glass-break sensor
Glass protection for all vehicles with hard-top and windup windows. Sensor is not prone to false alarm due to vibration
-
Audio Intrusion Detection
Built-in amplifiers filter and amplify the noises inside the cabin of vehicle. When the high frequencies associated with breaking glass are detected, as trigger signal is sent to the alarm system
Operation
-
Active Microwave Protection Field
Built-in electret microphone picks up all sound from inside the vehicle, filtering everything except the high frequencies associated with smashing glass. Triggers if the noise exceeds the set level
-
Temperature compensative circuitry
Ensures sensitivity does not change as ambient temperature rises or falls
-
Sensitivity adjustment
Sensor allows installer to adjust sensitivity to provide compatibility
|
|
|
Tilt sensor
This sensor has been developed to detect a change in angle of the a vehicle
Operation
-
Environment adjustment
If vehicle is buffeted by strong gust of wind, the sensor allows the vehicle time to return to the original angle
-
Adjustable sensitivity
Allows installer/user to adjust the two sections of the sensor independently
|
|
|
Reverse Parking Sensor
This sensor is designed to provide an aid to reverse parking. The driver is made aware of any obstacles behind the vehicle which may not be visible.
Colour match to vehicles bumper colour
Operation
-
Four ultrasonic detector heads
Detector heads may be mounted flush in the bumper or above/below bumper on brackets where clearance behind bumper does not allow for flush mounting
|
|
|
Window wind-up kit
Automatically closes 2-4 windows upon locking
|
|
|
IPOD/iPhone Universal interface
Connect your IPod/iPhone to your vehicles existing radio to play your own music
|
